Software

DentalCAM

DentalCAM 9

DentalCAM9 Install instructions

Document: DentalCAM9 Install instructions| 326,75 KB|12.10.2026
Download DentalCAM 9

V: VC_redist.x64| 17,86 MB|12.10.2026
Download DentalCAM 9

V: dentalcam_9.2.0| 578,55 MB|12.10.2026
Download DentalCNC 9

V: dentalcnc_9.1.9| 165,87 MB|12.10.2026

DentalCAM 8

DentalCAM8 Install instructions DE/EN

Document: DentalCAM8 Install instructions DE/EN| 320,77 KB|12.10.2026
Download DentalCAM 8

V: 8.13.00.P3| 1,27 GB|12.10.2026

DentalCAM 7

DentalCAM7 Install instructions DE/EN

Document: DentalCAM7 Install instructions DE/EN| 320,77 KB|12.10.2026
Download DentalCAM 7

V: 7.09.00| 442,24 MB|12.10.2026

DentalCAM 6

Download DentalCAM 6

V: 6.17.00| 275,67 MB|12.10.2026

SilaMill 4

Download SilaMill 4

V: 4.2.4| 28,08 MB|12.10.2026

SilaMill e3

Download SilaMill e3

V: 8.12.00.T2.1.0| 860,31 MB|12.10.2026
Download SilaMill e3

V: TrimCAM_2.1.3| 512,36 MB|12.10.2026

Please contact our support team before installing the firmware


Installing DentalCAM 9
Please read the instructions in the download folder carefully before installation

Brief description:
1. Install all Windows updates and update all hardware drivers
2. Install VC_redist.x64 – a restart may be necessary
3. Install DentalCAM – do not start the programme yet!
4. Install dentalcnc – the programmes can now be launched


Installation of DentalCAM 7 and 8
Please read the instructions in the download directory carefully before installation

Brief description:
1. Install all Windows updates and update all hardware drivers
2. Extract the ZIP file.
3. Run Setup.exe and follow the instructions provided by the installation programme


Installation of DentalCAM 6 and SilaMill 4

1. Install all Windows updates and update all hardware drivers
2. Plug the dongle into a USB port on the PC that will be used to operate the milling machine.
3. Download the relevant installation file using the link on this page.
4. Extract the ZIP file.
5. Run Setup.exe and follow the instructions provided by the installation programme. Please note: All open programmes must be closed.
6. Further information can be found in the software manual.
7. Please note: The software and milling machine will only operate if the dongle is connected

exocad

exocad DentalCAD

Download exocad DentalCAD

V: exocad DentalCAD3.3SR1 Chemnitz + PartialCAD + Framework| 3,97 GB|12.10.2026

Installation
Download the latest exocad DentalCAD® software here.

The ZIP file contains all the files required to install the latest version:
- Exocad DentalCAD®
- Exocad PartialCAD ​​Module
- Exocad Framework
- 7-Zip data compression program
- Installation instructions in German and English for the basic installation

Important:
- The downloaded ZIP file can be extracted normally using the Windows "Extract All..." function.
- Be sure to extract the "exocad-DentalCAD" and "PartialCADApp" directories using 7-Zip.