Additional curing duplicating silicone with low hardness
Shore A and high tear resistance, without any colour
pigments. Especially developed for the TEK-1 system.
- High reproduction of duplicated model
- Models are easy to remove thru the low Shore A hardness
- Suitable for all silicone dispensers
2 x 1 kg (component A+B) REF 261001
2 x 6 kg (component A+B) REF 261010
2 x 25 kg (component A+B) REF 261020
TEK-1 Vest is a phosphate bonded, graphite-free precision
investment for TEK-1 onepiece-casting and for partial denture
framework in the speed casting technique.
- super fine corn size, creamy consistency
- perfect fitting, very smooth casting surface
- easy to divest
TEK-1 VEST should be used with TEK-1 VEST Liquid!
5 kg TEK-1 VEST carton (28 x 180 g) REF 261104
20 kg TEK-1 VEST carton (112 x 180 g) REF 261103
20 kg TEK-1 VEST carton (50 x 400 g) REF 261101
1.000 ml TEK-1 VEST Liquid REF 261150
3.000 ml TEK-1 VEST Liquid REF 261160
1,0 Liter bottle
3,0 Liter canister
For the final high polish of the interior surfaces of the
secondary crowns in combination with the TEK-1 POL diamond
Kemp brushes, hard (white),
pack of 10 pieces REF 261310
Kemp brushes, soft (goat hair),
pack of 10 pieces REF 261320
A self-insolating and elastic dipping wax for the production of
primary and secondary crowns in the TEK-1 technique.
200 g TEK-1 Wax REF 261330
TEK-1 POL guarantees for mirror-finish interior surfaces of the secondary crowns. TEK-1 POL will add with the felt points.
200 g TEK-1 POL can REF 261340
Mounted felt points for the prepolish of the interior surfaces of the secondary crowns in combination with the TEK-1 POL diamond polishing paste.
Felt points, pack of 10 pieces REF 261350
Silicone Polishers for the prepolish of the secondary crowns;
TEK- 1 Polisher, 50 pieces REF 261353
Mandrels for the use with TEK-1 Polishers, 2,35 mm shank.
TEK-1 mandrels, 10 pieces REF 261355
TEK-1 VEST 20 kg (50 x 400 g);
3.000 ml TEK-1 liquid;
100 g TEK-1 WAX;
2 x 1 kg TEK-1 SIL;
100 g TEK-1 LEG;
disposable ring tape;
stabilizers size 3 & 4, 2 of each;
base plates, size 2 & 3, one of each;
100 ml measuring cylinder,
*only available after a TEK-1 training course
TEK-1 Grind & Polish starter set
3 x Conofix emery paper mandrel (0° or 2°);
Conofix emery paper in 120/240/600 ?m, 10 of each;
Kemp brushes (5 x hard, 5 x soft),
10 x felt points;
200 g TEK-1 POL.
Shank 2,35 mm, 2° REF 261501
Shank 2,35 mm, 0° REF 261502
Shank 3,0 mm, 2° REF 261503
Shank 3,0 mm, 0° REF 261504
TEK-1 LEG is a non-precious, chromium cobalt-based bonding alloy. It does not contain any nickel, beryllium or gallium.
TEK-1 LEG provides an economical alternative to precious metal and palladium-based alloys. Its low hardness of only 285 VH 10 allows TEK-1 LEG to be easily milled, which is an advantage when fabricating fixed units for fixed/removable
500 g TEK-1 LEG REF 261200
1.000 g TEK-1 LEG REF 261210